DQ41F Low Temp Ball Valve
Product overview
Product model: DQ41F
Nominal diameter: DN15~500mm
Nominal pressure: PN1.6~10.0MPa
Applicable medium: water, oil, steam, acid and other corrosive media
Applicable temperature: -196-29℃
Main material: LCB, CF8
Drive mode: manual, electric, pneumatic
Design standard: ASMEB16.34GB/T12224
Structure length: ASMEB16.10GB/T12221
Connection flange: ASMEB16.34JB/T79
Test and check: JB/T9092 API 598
DQ41F Low Temp Ball Valve summary:
DQ41F Low Temp Ball Valve produced and sold by Baigang valve group are mainly applicable to ethylene, liquefied natural gas and other chemical plants. The liquid cryogenic media output are such as ethylene, liquid oxygen, liquid hydrogen, etc.This kind of medium is not only flammable and explosive, but also needs to be gasified and gasified when the temperature is raised, which is hundreds of times the volume expansion.Moreover, these media have strong permeability and are easy to leak, making it difficult to process and manufacture.
DQ41F Low Temp Ball Valve product Structure Features:
1. Pressure parts of the material can withstand the temperature changes caused by the medium expansion, shrinkage, the structure of the sealing part of the temperature changes will not produce permanent deformation. For the following conditions -100 ℃, the valve parts should be cryogenic treatment before finishing, the parts will be immersed in a liquid nitrogen tank for cooling, when the temperature reaches -192 ℃ parts, start holding 1-2h, and then removed Natural treatment to the room temperature, review cycle 2 times.
2, the valve cover with long structure, its purpose to protect the function of stuffing box, the stuffing box at a farther position from the low temperature to ensure the sealing effect of packing, but also can be wound cold insulation material to prevent loss of cold energy. Long neck neck length according to the use of temperature and cold insulation material to choose a different length. When the packing sealing effect is reduced, you can add the grease from the middle of the packing box to form the oil seal layer, reducing the pressure difference of the packing box and improving the sealing performance.
3, the use of temperature below -100 ℃, the stem material after chrome or nitriding, improve the stem surface hardness and improve the reliability of packing seal.
4, the low temperature ball valve to prevent abnormal pressure structure, due to the low temperature valve gasification, the rapid expansion of its volume, the pressure will rise abnormally, when the valve cavity pressure rises, the valve cavity and import connectivity, or the valve inlet Pressure relief valve placed at the end to ensure the safe use of the valve.
5, low temperature ball valve gasket with at room temperature, low temperature conditions and temperature changes can be reliable sealing and recovery.
DQ41F Low Temp Ball Valve product performance parameters:
|
Test pressure (MPa) |
Nominal pressure (MPa) |
Pressure class |
JIS (K) |
|||||||
|
1.6 |
2.5 |
4.0 |
6.4 |
10.0 |
150 |
300 |
600 |
10K |
20K |
|
|
Strength test |
2.4 |
3.75 |
6.0 |
9.6 |
15.0 |
3.0 |
7.5 |
16.5 |
2.4 |
3.8 |
|
Seal test |
1.76 |
2.75 |
4.4 |
7.04 |
11.0 |
2.2 |
5.5 |
12.1 |
1.5 |
2.8 |
|
Airtight test |
0.4 ~ 0.7MPa |
|||||||||
DQ41F Low Temp Ball Valve main parts of the product material:
|
Product number |
DQ41F-10C-100 |
DQ41F-10P-100P |
|
DQ47F-10C-100 |
DQ47F-10P-100P |
|
|
Body |
LCB |
CF8 |
|
Sphere |
304 |
304 |
|
Valve stem |
304 |
304 |
|
Sealing ring |
PTFE |
PTFE |
|
filler |
PTFE + O-ring |
PTFE + O-ring |
|
Suitable media |
Water, oil, steam and so on |
Acid and other corrosive media |
|
proper temperature |
-50 ~ 29 ℃ |
-196 ~ 29 ℃ |
DQ41F Low Temp Ball Valve product main dimensions:
|
Product number |
Nominal diameter |
PN1.6-2.5MPa |
WT |
|||||||
|
DN |
L |
D |
D1 |
D2 |
b |
Z-Φd |
H |
W |
(kg) |
|
|
DQ41F-16C |
15 |
130 |
95 |
65 |
45 |
14 |
4-Φ14 |
178 |
140 |
3 |
|
20 |
140 |
105 |
75 |
55 |
14 |
4-Φ14 |
184 |
160 |
4 |
|
|
25 |
150 |
115 |
85 |
65 |
14 |
4-Φ14 |
195 |
180 |
5 |
|
|
DQ41F-16P |
32 |
165 |
135 |
100 |
78 |
16 |
4-Φ18 |
280 |
250 |
9 |
|
40 |
180 |
145 |
110 |
85 |
16 |
4-Φ18 |
280 |
300 |
11 |
|
|
50 |
203 |
160 |
125 |
100 |
16 |
4-Φ18 |
300 |
350 |
15 |
|
|
65 |
222 |
180 |
145 |
120 |
18 |
4-Φ18 |
330 |
350 |
19 |
|
|
80 |
241 |
195 |
160 |
135 |
20 |
8-Φ18 |
360 |
400 |
27 |
|
|
DQ9B41F-16C |
100 |
305 |
215 |
180 |
155 |
20 |
8-Φ18 |
400 |
500 |
38 |
|
125 |
356 |
245 |
210 |
185 |
22 |
8-Φ18 |
430 |
600 |
58 |
|
|
150 |
394 |
280 |
240 |
210 |
24 |
8-Φ23 |
500 |
800 |
81 |
|
|
200 |
457 |
335 |
295 |
265 |
26 |
12-Φ23 |
680 |
800 |
95 |
|
|
DQ9B41F-16P |
250 |
533 |
405 |
355 |
320 |
30 |
12-Φ25 |
790 |
1300 |
140 |
Reminder:
All text, data and pictures in this article are for reference only.To see more details of the DQ41F Low Temp Ball Valve performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.
Headquarters Tel: +86-021-57278880
Sales Tel: +86-021-57278881
Fax: +86-021-57278882
E-mail: baigangvalve@163.com
Site: www.m.huabeibianxian.com
Add: Tinglin Industrial Park, Jinshan District, Shanghai
Sweep Mobile Access
